Woodsmith Podcast Store
Podcast #36 — Hand-Cut Dovetails
Click on the following links to purchase these items: Woodsmith Free Preview
Seminar Guide – Hand-Cut Dovetails
(The seminar guide includes two articles on cutting dovetails by hand — Hand-Cut Dovetails from ShopNotes No. 18 and Half-Blind Dovetails from Woodsmith No. 107)
Podcast #35 — Tuning Your Hand Plane for PerformanceClick on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide – Tuning Your Hand Plane for Performance
(The seminar guide includes three articles on tuning up hand planes — Restoring a Bench Plane from ShopNotes No. 47, 5 Steps for Perfect Plane Performance from Woodsmith No. 153, and Removing Rust with Electrolysis from ShopNotes No. 72.)
WorkSharp Sharpening System WS3000 @ $199.99
Podcast #34 — 7 Must-Have Shop-Built Table Saw Accessories
Click on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide – 7 Must-Have Shop-Built Table Saw Accessories
(The seminar guide includes three articles on table saw accessories — 7 Must-Have Table Saw Accessores from ShopNotes No. 92, Dead-On Accurate Miter Gauges from Woodsmith No. 157, and Snap-In Splitters from ShopNotes No. 83.)
Kreg KMS7303 30″ Miter Bar @ $23.99
Threaded Inserts 1/4″-20 (8-pak) @ $4.49
Podcast #33 — Quick & Easy Joinery
Click on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide – Quick & Easy Joinery
(The seminar guide includes three articles on joinery techniques that are both fast and easy to do — Trouble Free Half Laps from Woodsmith No. 140, Biscuit Joinery from Woodsmith No. 163, and Pocket Hole Joinery from Woodsmith No. 136.)
Freud 8″ Stacked Dado Set @ $99.99
Kreg K3 Master Pack @ $139.99
Porter-Cable #557 Biscuit Joiner @ $229.99
Podcast #32 — Router Table Tips, Tricks, and Techniques
Click on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide – Router Table Tips, Tricks, and Techniques
(The seminar guide includes twenty-four pages, with lots of great information from Woodsmith Issue’s No.110 & 84, Workbench Aug. 2006 & Oct. 2006 issues, and ShopNotes Issue’s No. 20 & 50.)
Amana #47118 Flush Trim Bit @ $23.99
Amana #49520 3/4″ Roundover Bit @ $55.99
Bench Dog Feather-Loc Featherboard @ $24.99
Podcast #31 — Selecting Lumber for Great-Looking Projects
Click on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide – Selecting Lumber for Great-Looking Projects
(The seminar guide includes eighteen pages of great information from Woodsmith Issue No.151, the Workbench June 2006 issue, and five short articles from ShopNotes Issue’s No. 70, 34, 9, 5, & 23.)
Podcast #30 — 3 Basic Router Bits/17 Moldings
Click on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide – Top 5 Shop-Built Router Jigs
(This issue of the seminar guide features four great articles from Woodsmith magazine: a couple on routing moldings, one on picture frames, and one on cutting perfect miters for frames. Plus, you’ll find a bonus from Woodsmith’s Online Extras.)
Podcast #29 — Top 5 Shop-Built Router Jigs
Click on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide – Top 5 Shop-Built Router Jigs
(This issue of the seminar guide includes two complete articles from ShopNotes magazine and part of another article from ShopNotes — a total of 12 pages of great information.)
Podcast #28 — Oils and Varnishes: Getting the Finish You Really Want
Click on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide – Oils and Varnishes
(Guide includes step-by-step instructions for applying boiled linseed oil, Watco Danish Oil, General Finishes Arm-R-Seal Oil & Urethane Topcoat, plus Gel, Semi-Gloss, and High-Gloss Varnishes. You’ll also receive four great articles from Woodsmith and one from ShopNotes magazine.)
Podcast #27 — 10 Essential Hand Tools for Your Shop
Click on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide – Essential Hand Tools
(Guide includes four great articles from Woodsmith, one each on bench chisels, combination squares, hammers and hand planes, plus two articles from ShopNotes, one on hand scrapers and the other on the spokeshave.)
Starrett Combination Square
Japanese Saw - Ryoba
Japanese Saw - Dozuki
Lie-Nielsen No. 4 Smooth Bench Plane
Podcast #26 — Turning Pens on the Lather: From Start to Finish
Click on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide – Turning Pens FREE!
(Guide includes four pages with photos and captions from Brian Simmons, assistant manager of the Woodsmith Store.)
Podcast #25 — Using Hand Planes & Scrapers for a Smooth Finish
Click on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide – Using Hand Planes & Scrapers for a Smooth Finish
(Guide includes four great articles on hand planes and scrapers, two from ShopNotes “Shop Talk: Hand Planes,” and “Hand Scrapers;” and two from Woodsmith “Smoothing With a Hand Scraper,” and “…Scraper Sharpening Jig.”)
Bahco Card Scrapers
Woodsmith® Cabinet Scraper System
Woodsmith® RTA Hand Plane Kit
Woodsmith® RTA Scraper Plane Kit
Lee Valley Veritas Tri-Burnisher
Podcast #24 — Troubleshooting: Answers to Your Home Repair Questions
Click on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide – Home Repair Troubleshooting
(Guide includes two four-page articles from Workbench “Trim Carpentry Secrets,” and “Tips From a House Detective.”)
Podcast #23 — Pocket Hole Joinery: Simple & Strong Cabinetmaking
Click on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide – Pocket Hole Joinery
(Guide includes a couple of two-page articles, one from Woodsmith “…Pocket Hole Joinery,” and one from Workbench “Kreg K3 - Pocket-Hole Jig,” plus a two-pager from Workbench: “A Workstation for Pocket Joinery.” Also included is a great 3-page article from Woodsmith with step-by-step instructions on how to build a “Tile-Top Table” using pocket hole joinery.)
PlansNow Pocket Hole Joinery Projects:
Sectional Entertainment Center (Woodsmith Issue No. 136)
Pocket Hole Joinery Technique (Woodsmith Issue No. 136)
Kreg Pro Jig Pack
Right Angle Clamp
Rocket w/Bit
Kreg Bench Clamp
Econo P Hole Jig
Screw Crs 1.25 # 8 (500)
Screw Fine 1.25 #7 (500)
Screw Crs 1.25 (1000)
Podcast #22 — Buying & Getting the Most Out of a Band Saw
Click on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide – Band Saw
(Guide includes a four-page article from ShopNotes “Band Saw Set-Up,” and a two-page article from Woodsmith “Band Saw Blades,” plus, three great bonus articles and much more.)
Olson Saw Co. Saw Blade Lubricant $4.69
Kreg Band Saw Fence $119.99
Olson Saw Co. Cool Blocks $12.95
Podcast #21 — 5 Things You Didn’t Know You Could Do w/ Your Table Saw
Click on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide – 5 Table Saw Techniques
(Guide includes five great two-page articles from Woodsmith and ShopNotes magazines “Adjustable Taper Jig,” “…Pattern Cutting,” “…Cove Cutting,” “Kerf Bending Plywood,” and “…Raised Panel.”)
Forrest Woodworker II Premium Table Saw Blade, $119.99 Retail Price
(Free Shipping in the U.S.)
Podcast #20 — Machine-Cut Dovetails
Click on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide – Machine-Cut Dovetails
(Guide includes a two-page article “Porter-Cable Dovetail Jig,” at 4-page article “…Routing Dovetails,” and 2 two-page articles on “Using the Leigh Dovetail Jig,” and “Using the Keller Jig.”)
PlansNOW Dovetail Project: Four-Drawer Dresser (Woodsmith No. 58)
Porter-Cable Dovetail Jig (Model #4212), $169.99 Suggested Retail Price (Free Shipping in U.S.)
Porter-Cable 2-1/4hp Router (Model #892), $199.99 Suggested Retail Price (Free Shipping in U.S.)
Podcast #19 — Veneering: Step-by-Step from a Master Craftsman
Click on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide – Veneering
(Guide includes a four-page article “Veneering Basics,” a two-page technique article “Taming Those Wild Veneers,” and a one-page feature “Making Furniture with Curve Appeal.” )
PlansNOW Veneering Projects: Jewelry Chest (Woodsmith No. 159)
Elegant Hall Table (Woodsmith Magazine No. 147)
Build a Poker Table (Woodsmith Magazine No. 158)
Jonathan Benson Furniture Design
Podcast #18 — Frames & Panels: The Heart of Cabinetmaking
Click on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide – Frames & Panels
(Guide includes a two-page technique article on “…Simple Frame & Panel Joinery,” plus a four-page article “Frame & Raised Panels.”)
PlansNOW Frame & Panel Project: Swing-Out Kitchen Pantry, includes Building Arch-Top Raised Panel Doors (Workbench Magazine from August/2004)
Amana Door-Making Set (TRS-260), $99.99 Suggested Retail Price (Free Shipping in U.S.)
Amana Door-Making Set w/ Back Cutter (TRS-250), $119.99 Suggested Retail Price (Free Shipping in U.S.)
Podcast #17 — 7 Steps to a Perfect Workpiece: Squaring Up Lumber
Click on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide –Squaring Up Lumber
(Guide includes a technique article on “…Cutting Perfect Pieces on a Table Saw,” plus a four-page article “Mastering the Jointer.”)
Fast, Smooth Cuts w/ a Glue-Line Rip Blade (Woodsmith from No. 170)
Freud Glue Line Rip Blade
Incra 5″ Square - Guaranteed Square, $39.99 Suggested Retail Price (Free Shipping in U.S.)
Incra Jig Miter Gauge 1000SE, $149.99 Suggested Retail Price (Free Shipping in U.S.)
Podcast #16 — Bending Wood: 2 Methods to Creating Curves
Click on the following links to purchase these items:
Woodsmith Free Preview
Seminar Guide–Bending Wood
(Guide includes plans for a Table Saw Zero Clearance Insert & a short Ripping Thin Strips article, plus a Bent Lamination technique article)
Curved-Leg End Table Woodworking Plan
Build a Curved-Stretcher Accent Table
Woodworking Basics: Choosing & Using Glues