Eagle Jigs Solve Shop Problems
The editors here at Woodsmith and ShopNotes magazines see a lot of new products come across our desks. Some we have to laugh at, and others are really good ideas.
Eagle Jigs is a small company out of Kansas City, Missouri that seem to come up with some good ideas. They’ve got several products that you might want to consider for your shop. They seem to have a knack for developing products that solve real problems in the woodworking shop. Maybe that’s because they’re woodworkers themselves.
On
e such product is the Versa-Block. It’s one of those things that looks so simple, but the more you use it, the more uses you’ll find for it. It’s an octagon-shaped piece of solid alumimum. Each face has another octagon shape milled onto the surface. Each edge of the smaller octagon is offset from the corresponding edge of the main body. It’s easier to understand once you see the photos and hold it in your hand. On one side, the offsets are in 1/16″ increments. On the other side, the offsets are in 1/8″ increments.
You can use the Versa-Block for a number of things. The most obvious is setting bit heights on your router and blade heights on your table saw. But you can also mark offsets from the edge of a workpiece up to one inch. And you can use the Versa-Block as a square during glue-ups. Like their web site says, “This is an accessory that the more you use, the more uses you will find to use it.”
Another handy item they’ve come up with is the Laser-Cut Triangle. They come in 3″ and 6″ sizes. The triangles are similar to the aluminum Swanson Speed Square you’d use for framing a house. But these are plastic and laser-etched for accuracy. One side of the triangle has small holes — like the Incra Marking Rules — for the tip of your pencil for drawing and marking lines parallel to an edge. The base of the triangle is etched in 1/16″ increments. The “hypotenuse” of the triangle has angular markings etched so that you can use it as a protractor. The prices are reasonable enough that you can afford to have a few in the shop.